Pro/ProHeat Series-How to clean floor nozzle window

How do I clean the lint from under the floor nozzle on my Pro/ProHeat Series Deep Cleaner?

ANSWER:  The floor nozzle window is removable for easy cleanup after use.

Before starting, please be sure the machine is not plugged in and the machine handle is reclined.

Detach the Phillips head screws located at the base of the clear floor nozzle. Then, remove the Tank-In-Tank Assembly. Next, remove the rectangular gasket at the top of the nozzle, and pull the clear floor nozzle forward to remove the tabs from the notches. This clear floor nozzle is removable so you may be able to access this area and clean.

When putting the clear floor nozzle back in place, please be sure the tabs at the top of the nozzle are inserted into the notches provided on the base of the machine. If you do not have the tabs in place properly, you may have a problem with the machine's suction.

Rotate the window down into place, replace the screws, and replace the rectangular gasket.

For more information, please contact a BISSELL Consumer Services Representative by calling 1800 811 183 or australiacustomerservice@bissell.com.