The following parts are not available for purchase online.
To enquire about a price and/or make an order, please call BISSELL Freecall 1800 811 183.

(Click here for a diagram of parts)

Key	Part Number	Description
1	BS-2109201	4” small area tool assembly
1.1	BS-2030966	Brush 4” tool
2	BS-2159155	3” tough stain tool assembly
2.1	BS-2149155	Brush for 3” tough stain tool
3	BS-2153163	Hose & grip assembly
4	BS-0159041	Tank & bladder with autoload (without lid)
4.1	BS-2130213	Tank baffle and float assembly
4.2	BS-2140325	Water level indicator float (red)
4.3	BS-2100315	Bladder
4.4	BS-6037041	Auto load & screws for tank & bladder
5	BS-0154439	Water tank lid assembly
5.3	BS-2133501	Red lint filter basket
6	BS-0141782	Tank drain cap & gasket (old design tank)
7	BS-2144503	Upper handle assy Bronze
7.1	BS-2109592	Valve assy trigger
8	BS-2109148	Spraying crevice tool
9	BS-2101197	Turbobrush
10	BS-2104052	Oval window seal
11	BS-2149871	Front window nozzle & oval seal
12	BS-2136994	Diverter
13	BS-2145170	Diverter knob assembly
14	BS-2144933	Main housing assembly with clearview (bronze)
15	BS-2114054	Gasket diverter
16	BS-2101785	Shampoo bottle assembly
16.1	BS-2101795	Cap assembly for shampoo bottle
16.2	BS-2106241	Overseal autoload seal
17	BS-2104050	Gasket short duct
18	BS-2103161	Air duct short
19	BS-2104051	Motor intake gasket
20	BS-2132984	Motor cover
21	BS-2144073	Cover belt (bronze)
22	BS-2104053	‘O’ ring for air duct long
23	BS-2103160	Air duct long
24	BS-2104056	Gasket motor
25	BS-2105813	Motor assembly 240v
26	BS-2107181	Pump w/larger pulley
27	BS-PB001	Belt pump with instructions (pack of 2)
28	BS-BB001	Brush belt (toothed) (pack of 2)
29	BS-2158001	‘T’ connector (odd barb)
30	BS-2140710	Receiver autoload cap & assembly
31	BS-5559102	Lever pedal handle release
32	BS-2100170	Wheel axle
33	BS-2139754	Wheel
34	BS-2106215	'C' clip for axle
35	BS-2151171	Base assembly with window & 6 row brush
36	BS-2100107	Automix assembly
37	BS-2108722	Automix piston + 'O' ring
38	BS-2149131	Bare floor attachment
39	BS-5559121	Pivot arm right assembly
40	BS-5559113	Arm retainer pack l&r
41	BS-2000010	Elevator lever r&l w/springs
42	BS-2106107	Spray tip assembly
43	BS-2102602	T' connector regular
45	BS-5559118	Pivot arm left assembly
46	BS-2101128	Floor brush assembly (6 rows)
47	BS-2104479	Wiring harness assembly
48	BS-2146752	Tool caddy with cord release
49	BS-2131154	Power cord release cap
50	BS-2104507	Heater assembly
51	BS-2108810	Switch
52	BS-2144346	Handle assembly lower back (bronze)
53	BS-2105604	Heating light assembly
54	BS-2144351	Handle assembly lower front (bronze)
55	BS-2101256	Bushing wheel
56	BS-2108550	Heater stabiliser block rubber
57	BS-2102853	Powercord (ho5 vv-f)
58	BS-5556503	Flow indicator Assy including cap, spinner & filter
61	BS-2100489	Flow indicator base
62	BS-2106214	Flow indicator 'O' ring
63	BS-2105127	Automix knob
64	BS-0159043	Tank & bladder complete with lid
65	BS-2149851	Window (clearview assembly) & background
67	BS-2101075	Magnet
68	BS-2101071	Sensor
69	BS-2144927	Circuit board/housing assembly
70	BS-2149142	Pre-treat wand tool
71	BS-2152152	Applicator tool
72	BS-2100290	Handle screws & nuts kit
	BS-2153163	Solution hose
	BS-782	PVC Tubing (1metre)
	BS-6030910	6" stair tool (Optional Extra)
	BS-6030911	Brush for 6" stair tool

• Item Number 14: To remove the lower top housing
  • Turn smart mix knob to High Traffic.
  • Remove flow indicator item 58-60, water tank 64 and shampoo bottle.
  • Remove 6 securing screws.
  • When the cover is lifted, inspect smart mix valve item 37 and note how it is assembled and operates. The valve must be re-fitted into the top housing when re-assembled.

[back to list of parts]

 

 

 

 

 

• Item Number 16.2: Overseal autoload
  • Fits valve on items 4 and 66, and valve on item 16.
    

[back to list of parts]

 

 

 

 

 

• Item Number 56: To remove front

• Remove handle item 7.
• Remove tool holder item 48.
• Remove 4 screws securing front case.
• Press pedal item 31 and lower case onto its back (do not drop).
• Lift front case item 54 from the handle end. The front case will raise and hinge at the wheel. Lift until the clips at the wheel end come free from the lower case.
• Note: Position of heater and the heater securing rubber supports item 56.
• If motor fails to operate
  • Check the 5 Amp fuse located on the top of the motor windings. If blown, establish problem with motor and replace.
    
• If the unit fails to pump water
  The most common faults are:
  • Pump failed
  • Pump drive belt broken
  • Water tank or shampoo bottle not located properly and not sealing onto base.
  • If the unit has been regularly used, the heater may be corroded or blocked with lime scale. The heater can be cleaned or replaced.

[back to list of parts]

[back to list of parts]

[back to list of parts]